6000 Series Ball Bearings
The lightest standard deep groove series, models 6000 to 6005, with the heavy 6300 series alongside for the same bores.
6000 series · models 6000 to 6005 · 6300 series alongside
The 6000 and 6300 model lists
The 6000 series is the lightest of the three standard deep groove series: against the same bore it runs the smallest outside diameter and width, which suits compact housings and light machinery. Its list runs 6000 to 6005, and the photographed family example — the 6003-2RS — sits in this series. The 6300 series stands alongside as the same-bore heavy alternative: models 6300 to 6310, the fullest section of the three standard series.
| Series | Models | Section against the same bore |
|---|---|---|
| 6000 series | 6000 to 6005 | The lightest standard section |
| 6300 series | 6300 to 6310 | The heaviest standard section |
Light, standard or heavy at one bore
The three standard series exist so one bore can take three envelopes: 6000 where space is tight, 6200 as the general default, 6300 where load and housing room allow the fuller section. Conversions between them are housing decisions — the bore stays, the outside diameter and width change — and an inquiry converting a position from one series to another should name both codes so the housing change is visible to everyone who reads the order.
Closures across both series
Both series run the family frame: open, ZZ or 2RS closures or customised sealing; clearance C0, C2 or C3 or customised; grades P0 to P4; chrome steel standard, stainless through the stainless line. The 6003-2RS example shows the sealed form of the light series; the same suffix system reads identically on a 6300 code.
Send an inquiry
List each 6000 or 6300 model with its closure and quantity, plus the destination market, and send the list through the inquiry form for a priced reply.